|
A
blend pot can be wired into a guitar in several
different ways. Because of this, we can only cover some
basic wirings that could be further developed for the
particular needs of your set-up. Below is a basic
diagram showing how the pot would be wired. We've also
included a couple of samples so you begin to see some of
the wiring
options.
| | 
This diagram uses the blend pot as a way to “pan”
from one source or pickup, to another. The output of the blend
control is then fed into a master volume and tone
control.
Here’s a “stereo” set-up that controls two
sources, but they don't interact or blend with one
another
This last diagram demonstrates using a
mini-toggle or push/pull pot with the blend pot to switch between
stereo and mono outputs. In the “mono” mode, the “ring” connector
has no function, so a stereo or mono plug could be used.
| |
